SHJ-5 Pneumatic Double CuttersCommutator Turning Machine
适用于各类电机换向器高精度自动车削的专用设备。采用进口PLC程控，双刀车削，粗车精车一次性完成，三菱变频无级调速，硬质合金V形块支撑转子轴，轴承档有自动喷油装置，百分表显示进刀车削量，进口阻尼气缸控制走刀速度，车削速度均匀，配置高硬度宝石刀头，皮带摩擦转子外圆自动车削，所有动作一次完成，人工上下工件，操作简单方便。
Applicable to all types of motor commutator high-precision automatic turning of special equipment. It adopts imported PLC programcontrol, double-pole turning and roughing car finish once, Mitsubishi frequency conversion stepless speed regulation, carbide V-block support rotor shaft, bearing file has automatic oil injection device, dial indicator shows cutting amount , Imports thedamping cylinder to control the cutting speed, the turning speed is uniform, the disposition high hardness gem cutter head, thebelt friction rotor outer circle automatic turning, all movements once completes, the artificial upper and lower work piece, theoperation is simple and convenient.
技术参数/Technicai Parameters
| 电源开关电流值Supply voltage | AC220±10% 50Hz |
| 源压力差Air pressure |
0.5~0.7MPa |
| 总工作效率Total power | 1.5kw |
| 转子外径Rotor OD | Φ20~Φ80mm |
| 车削加工毛糙度Turning roughness | Ra0.4 |
| 换向器长度Commutator length | ≤30mm |
| 换向器直径Commutator diameter | 5~40mm |
| 工件线速度Workpiece line speed | 0~600m/min |
| 转子轴径Rotor shaft diameter |
3~20mm |
