jinnianhui金年会官网,jinnianhui金年会

您现在所在的位置:首页--SKJ-1型 单刀单伺服精车机
SKJ-1型 单刀单步进驱动器精车机
上传时间:2019-06-04





SKJ-1 Servo Single Cutter Commutator Turning Machine

 

本机是精密车削电机换向器外径的专用设备。采用进口PLC程控,触摸屏修改参数,伺服电机控制走刀速度,车削均匀稳定,三菱变频无级调速,硬质合金V形块支撑转子轴,轴承档有自动喷油装置,百分表显示进刀车削量,配置高硬度宝石刀头,皮带摩擦转子外圆自动车削,所有动作一次完成,人工上下工件,操作简单方便。

 

 

This machine is a precision turning motor commutator diameter of the special equipment. It adopts imported PLC program and touch screen to modify the parameters. The servo motor controls the cutting speed, and the turning is even and stable. Mitsubishi frequency conversion stepless speed regulation, carbide V-block supports the rotor shaft, the bearing file has automatic oil injection device, and the dial indicator shows Knife turning capacity, configuration of high hardness gemstone head, belt friction rotor cylindrical automatic turning, all actions once completed, manual up and down the workpiece, the operation simple and convenient.




技术参数/Technicai Parameters


电源线线电压Supply voltage AC220±10% 50Hz
氧气减压阀压为Air pressure

0.5~0.7MPa

总工作电压Total power


2kw


转子外径Rotor OD Φ20~Φ80mm
钻削凹凸不平度Turning roughness Ra0.4
换向器长度Commutator length ≤30mm
换向器直径Commutator diameter 5~40mm
工件线速度Workpiece line speed 0~600m/min
转子轴径Rotor shaft diameter 3~20mm



扫一扫关注jinnianhui金年会官网,jinnianhui金年会
Copyright © 2014 浙江jinnianhui金年会官网,jinnianhui金年会自动化设备股份有限公司 All Rights Reserved 备案号:
云开·体育全站apply(kaiyun)(中国)官方网站平台金年会·(中国)平台金年会·(jinnianhui)金字招牌诚信至上米乐|米乐·M6(中国大陆)官方网站星空体育·(中国)官方网站-XINGKONG SPORTS